Subscribe to Survival Existence

  • Get Home Bag
    Assembling a get home bag Something is wrong. You don't know what it is. Your car won't start. No planes over head. No sounds of cars on the highway. Do you have a Get Home Bag? Do you have water? Can you make fire? Having a get home bag is important when you are away […]
  • Make Fire With Vaseline Cotton Ball and Jute Twine
    Vaseline Cotton Ball and Jute Twine Starting a fire is easy with Vaseline soaked cotton balls and some jute twine. In this You Tube video I explain how to use a Vaseline cotton ball as tinder to start a campfire for cooking and keeping warm in survival situations and for camping. Share on Facebook The […]
  • Garden Preparation For Spring
    Garden Preparation Getting a Garden Spot Ready for Spring Prepare a garden spot for spring planting by using some high mil black plastic. The black plastic will screen out the sun light killing any grass under it. Prepping a garden spot can also be done by placing cardboard over the area to be used [Read […]
  • How To Make Char Cloth and Charcoal
    Char Cloth Today I will show you how to make char cloth and charcoal. Some cotton cloth. Some pieces of wood. A small metal tin with one small hole punched in it. Add some fire and you can make char cloth to start a campfire and charcoal for writing on hard surfaces when you [Read […]

How To Reassemble The Glock 19 Slide Pt2

To reassemble the Glock 19 slide, you install the clean parts you have removed in reverse order.

Our Glock 19 You Tube Video

Reassemble The Glock 19 Slide

To reassemble the Glock 19 slide, take the slide and turn it on it's left side, extractor side up, and insert the extractor, being sure to place the pin in the hole. Holding the extractor in place with your finger, turn the slide over and insert the trigger disconnect plunger/pin and spring in it's hole spring side down. Insert the extractor spring/rod making sure the spring side is out. Next, insert the striker/firing pin into it's place, being sure the pin is forward. Now, turn the slide front side down and press the back of the striker/firing pin down into it's channel and slide the rear slide plate into it's place and over the striker/firing pin. Doing so will keep the striker in place while you use a small screwdriver or punch to push the extractor spring/rod down past the rear slide plate. While holding the extractor spring/rod down, push the slide plate all the way into place. You should hear a click.

Once you have reassembled the Glock 19 slide you are ready to install the slide onto the lower hand grip body and properly oil the Glock handgun.

Reassemble The Glock 19 Slide

Many Glock Owners Over Think Oiling

Before reassembling the Glock, lets discuss proper oiling of Glock handguns.

Many Glock owners over think and as a result, over oil the Glock. Many gun manufactures build in close tolerances into their guns in the name of accuracy. These close tolerances cause the gun to do, what the gun was designed to do. Be accurate. The down side of these close tolerances is the need for the gun to be kept well cleaned and well oiled. The Glock is a beast of a different color. It was designed to be very dependable with little thought given to cleanliness.

The dependability of the Glock is legendary. This dependability comes at a price. That price is accuracy. While some accuracy was forsaken, dependability increased dramatically. This dependability is due to greater tolerances in fitted parts. The greater tolerances decrease the need for cleaning and oiling. Less oil present means less fouling, burnt powder and grit sticking to the oil in the critical areas of the gun. Don't misunderstand. The Glock is an accurate gun at combat distances. It's design is more than adequate for it's intended purpose and the gun can out shoot most shooters ability to shoot.

The Glock, as ugly as it is, is the most prefered firearm for most police departments and several special forces types due to its dependability. That translates into an extremely high probability of it going BOOM when you pull the bang switch.

Installing The Slide and Properly Oiling The Glock

A Glock only needs to be oiled in 3 places. Before installing the slide, put one drop of oil on each of the two forward slide guides. Wipe off any excess. Now install the slide and cycle the slide several times including pulling the trigger to insure the slide is installed correctly, the striker/firing pin is operating properly and to spread the oil to all four slide guides. Once you have cycled the gun several times, lock the slide back. With the slide back, put one drop of oil on the top rear of the exposed barrel and cycle it several more times. Lock the slide back once again and check the barrel to see if the oil was spread evenly. If it isn't, use your finger to spread it out.

You have now finished properly cleaning and oiling the Glock handgun.

If you would like to support this website and you are going to buy something from Amazon anyway, please use this link to Buy from Amazon.com

Thank You.

 

Helping You Help Yourself

Bobby

Share on Facebook

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

  

  

  

three × two =