Subscribe to Survival Existence

  • Get Home Bag
    Assembling a get home bag Something is wrong. You don't know what it is. Your car won't start. No planes over head. No sounds of cars on the highway. Do you have a Get Home Bag? Do you have water? Can you make fire? Having a get home bag is important when you are away […]
  • Make Fire With Vaseline Cotton Ball and Jute Twine
    Vaseline Cotton Ball and Jute Twine Starting a fire is easy with Vaseline soaked cotton balls and some jute twine. In this You Tube video I explain how to use a Vaseline cotton ball as tinder to start a campfire for cooking and keeping warm in survival situations and for camping. Share on Facebook The […]
  • Garden Preparation For Spring
    Garden Preparation Getting a Garden Spot Ready for Spring Prepare a garden spot for spring planting by using some high mil black plastic. The black plastic will screen out the sun light killing any grass under it. Prepping a garden spot can also be done by placing cardboard over the area to be used [Read […]
  • How To Make Char Cloth and Charcoal
    Char Cloth Today I will show you how to make char cloth and charcoal. Some cotton cloth. Some pieces of wood. A small metal tin with one small hole punched in it. Add some fire and you can make char cloth to start a campfire and charcoal for writing on hard surfaces when you [Read […]

Glock Striker Disassembly

Glock Striker disassembly or firing pin disassembly is easy. You simply use the slide as a support for the striker to remove the cups and the spring from the striker. I made a You Tube video to aid you in disassembling and assembling the striker.

Glock Striker Disassembly

Turn the slide up on the muzzle end and insert your Striker in Reverse of what it normally is inserted into the rear of the slide. The strikers lug will set on the ledge of the slide, allowing you to exert downward pressure on the spring and remove the two half cups from the striker. Once these two half cups have been removed, you can allow the spring to extend his full length and remove it and the Striker from the slide. Once the striker is free, remove the plastic sleeve from the striker and clean the striker and the inside of the sleeve.

Glock Striker Disassembly

Reassembly Is Opposite of Disassembly

Setting the slide up on its muzzle end once again, slide the sleeve back onto the striker. Pay close attention that the cut out in the sleeve slides around the striker lug. Insert the striker and sleeve again backwards into the slide. Replace the spring and pull it down.

Pay attention to where the end of the spring coil appears. You do not want the split cup to line up with the end of the spring coil. You want one half of the cup completely covering this area. Reinsert the cups with the lip side up and the smaller ends inside the spring. Once these cups are inserted, you can slowly release the tension on the spring and it will stay together and stay in position.

At this point you simply reassemble the firearm. Make sure and check it for function.

Glock Striker disassembly made easy.

Helping You Help Yourself

Bobby

Share on Facebook

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

  

  

  

twenty − nineteen =